Shutter strip Self-adhesive Polyurethane shuttter sealing foam strip

---

RMCS supplies top quality Shutter strip is used as a sealing strip for the prevention of grout loss through but joints in metal or wooden formwork. It is made of a polyurethane foam with a adhesive backing strip.

DIRECTIONS FOR USE:

• Ensure that the sides of the shutter panels are free of dirt, base grit, dust or grease oil.
• Apply Shutter strip to the side of the panel by peeling off the release paper and sticking the self-adhesive side to the panel.
• Place the next shutter panel in position firmly against the Shutter strip to ensure that the foam is compressed.

---

JOINT FORMER PRODUCT CODES AND SIZES:

Product	Foam	Width	Thickness
Code	Colour	(mm)	(mm)
GS5x20	Grey	5	20
GS10x20	Grey	10	20
GS15x20	Grey	15	20
WS5x20	White	5	20
WS10x20	White	10	20
WS15x20	White	15	20

---

Advantages:

• Self-adhesive backing makes our foam seal easy and clean to use.
• Supplied in various widths and thicknesses.
• Water based acrylic adhesive makes Shutterstrip or Shutter Seal easy to remove after use.

PHYSICAL PROPERTIES / TECHNICAL DATA:

Composition:	Self-adhesive, open cell Polyurethane foam.
Colours:	Grey or White.
Density Grey:	22 – 24 kg/m3.
Density White:	5mm width = 23 kg/m3 &
&nbsp	10 & 15mm width = 20 kg/m3.
Roll size:	10 meters.

Products from Rebar, Mesh and Construction Supplies (Pty) Ltd have been used in some of the largest projects in South Africa and the African Continent.

Construction Accessories Menu

Take 30 seconds and watch the videos here below to get a quick insight of the range of products that manufacture or distribute?