portable-combination-rebar-cutters-benders – Rebar, Mesh and Construction Supplies (Pty) Ltd

RMCS Portable Combination Rebar Cutters and Benders

Our portable and handheld combination rebar cutters and benders benders have over 25 years of proven on site reliability. They are the very best quality portable / hand held electric rebar cutter and benders on the market today. Contractors like the portability, reliability and the ability run on 220 volt single phase power. Ultimately the contractor will quickly find out that our cutting and bending eqquipment is invaluable. Our portable rebar benders are faster and safer to use than jigs or any other manual bending methods. Traditional bending methods take at least ten to twenty times longer and are not as consistent.

RC 16-BN Manual Rebar Cutter / Bender

Our RC 16-BN Manual Rebar Cutter / Bender, features drop-forged high grade alloy tool steel blades with special heat-treatment. Cuts rebar safely, cleanly and efficiently with minimal effort. Bends rebar up to 180 degrees with versatile operation. Can be bolted to floor or board for easy operation. Cutting and bending head can be bought and replaced separately. Weighs 16 kilograms.

DBC-16H Handheld Rebar Cutter / Bender

Our heavy duty, convenient DBC-16H rebar cutter and bender combination machine can cut and bend rebar up to 16mm. The DBC-16H enables you to cut 16mm rebar within 2.5 seconds and then bend it up to 180 degrees within 5.5 seconds whenever and wherever the need arises. The rebar cutting or bending option is selected by simply turning a lever. Weighs 17 kilograms.

DBC-25X Portable Rebar Cutter / Bender

Our compact DBC-25X portable rebar cutter bender combines rebar cutting and bending in one unit. The DBC-25X enables you to cut up to 25mm rebar within 5 seconds and then bend it up to 180 degrees within 6 seconds whenever and wherever the need arises. This single phase unit can run off a generator for deployment at remote sites. Weighs 129 kilograms.

MG20HB Portable Rebar Cutter and Bender

The MG20H Rebar Cutter and MG20B is very operator friendly and extremely easy to use. The cutter weighs 48 kilograms and the power pack weighs 6 kilograms. The MG20B Rebar Bender weighs of 59 kilograms. Both are easy to move around. Rebar Cutting is achieved via a hydraulic power pack and operated by using a foot switch. Rebar Bending is achieved via mechanical power transfer.

DS-32 Mobile Rebar Cutter and Bender

This Lombardini Diesel Engine driven mobile rebar cutter and bender, with an electric starter, will cut and bend rebar up to a diameter of 32mm. Cutting and bending is achieved through a hydraulic system. It requires minimum maintenance. This compact self sustained mobile rebar cutter and bender allows for movement over vast distances and into remote areas.

DBR-32WH Handheld Rebar Straightener Bender

DBR-32WH Rebar Straightner/Bender. Portable and runs off a single phase mains or generator. The DBR-32WH is a dual purpose tool with which you can straighten and bend 490N/mm2 rebar up to 32mm. It has come to the rescue on many a project, where rebar had to be bent or straightened in-situ. The DBR-32WH comes with an optional bending hook. Weighs 26 kilograms.

Products from Rebar, Mesh and Construction Supplies (Pty) Ltd have been used in some of the largest projects in South Africa and the African Continent.