Tilt-Up Panel Bond Breaker
Tilt-Up Panel bond breaker is the layer of separator substance applied in different forms between adjoining solid surfaces. It is used to ensure that there is no adhesive molecular bond between the surfaces.
Bond breakers are engineered products that form a membrane, allowing the surfaces to be separated easily. In some instances wax, petroleum-based substances or grease are used as bond breakers, but these chemicals will change characteristics of the surfaces on which they are applied.
Bond breakers are used over concrete surfaces to eliminate or reduce the cracking of slabs due to temperature and moisture fluctuations. Bond breakers also avoid shrinkage cracks on tilt-up walls. Bond breakers are applied on surfaces that will be joined together when the concrete is poured and thus become inseparable. Bond Breakers will alleviate the problem of the surfaces joining together and will allow the concrete elements to be separated.
Bond breakers are also used in breaking the bond between substrate and waterproofing membrane system, thus forming an adjustable bridge, resisting the movement of the water or moisture. Often a time, the importance of bond breaker as an inseparable part of the waterproofing system is being overlooked. If a bond breaker is not applied before the installation of a waterproofing membrane system, there are high chances that the membrane will wear and tear, forming holes, which would allow moisture into the substrate below, rendering the whole purpose of waterproofing system pointless.
They are also used to resists shrinkage cracks, which may appear on the concrete during casting, due to the unexpected evaporation of water from the concrete surface.
- Easy application by brush or sprayer
- Does not interfere with concrete placements
- Can be used as a mould release agent as well

Products from Rebar, Mesh and Construction Supplies (Pty) Ltd have been used in some of the largest projects in South Africa and the African Continent.
Construction Accessories Menu

RMCS Panelware Tilt-up System
Click here to obtain more information about our Panelware Tilt-up System?

RMCS Tilt-up Lifting Inserts
Click here to obtain more information about our Tilt-up Lifting Inserts?

RMCS Precast Erection Anchors
Click here to obtain more information about our Precast Erection Anchors?

RMCS Precast Two Hole Lifting Anchors
Click here to obtain more information about our Precast Two Hole Lifting Anchors?

RMCS Precast Type-T Lifting Anchors
Click here to obtain more information about our Precast Type-T Lifting Anchors?

RMCS Precast T-anchor Lifting Clutches
Click here to obtain more information about our Precast T-anchor Lifting Clutches?

RMCS Precast Type-O Lifting Anchors
Click here to obtain more information about our Precast Type-O Lifting Anchors?

RMCS Precast Type-P Lifting Anchors
Click here to obtain more information about our Precast Type-P Lifting Anchors?

RMCS Precast / Tilt-Up Lifting Sockets
Click here to obtain more information about our Precast / Tilt-Up Lifting Sockets?

RMCS Swivel Lifting Eyes or Lifting Hoists
Click here to obtain more information about our Precast Swivel Lifting Eyes or Lifting Hoists?
Take 30 seconds and watch the videos here below to get a quick insight of the range of products that manufacture or distribute?












