APPLICATION
Sutter Strip or grouting sealant is used for prevention of grout loss through but joints in metal or wooden formwork.
ADVANTAGES

Self-adhesive backing makes our shutter foam seal
     easy and clean to use.

Shutter strip or grout sealant is supplied in various widths
     and thicknesses.

Water based acrylic adhesive makes Shutter strip easy to
     remove after use.

PHYSICAL PROPERTIES / TECHNICAL DATA

The correct size to be used depends on the condition of the formwork or type being used:

DIRECTIONS FOR USE

Ensure that the sides of the shutter panels are free of dirt,
     base grit, dust or grease oil.

Apply Shutterstrip to the side of the panel by peeling off the
     release paper and sticking the self-adhesive side to the
     panel.

Place the next shutter panel in position firmly against the
     Shutterstrip strip to ensure that the foam is compressed.

Plastic Rebar Spacers and Concrete Rebar Spacers for Rebar
We supply a wide range of plastic spacers and concrete spacers for the rebar and construction industries, such as:
1.   Plastic Spacers for Rebar
2.   Concrete Spacers for Rebar
3.   Circular Plastic Spacers for Rebar Columns
4.   Plastic Centralisers for Rebar
5.   Fibre Cement Spacers for Rebar


Formwork and Scaffolding Accessories
We supply formwork and scaffolding accessories, to the Construction, Formwork and Scaffolding industries, such as:
1.   Base Jack Nuts for Scaffolding
2.   Base Jacks for Scaffolding
3.   Ferrule dollies for light Formwork
4.   Ferrule Jacks for Light Formwork
5.   Swivel Couplers for Scaffolding
6.   Fixed Couplers for Scaffolding
7.   T Bolts for Scaffolding Couplers
8.   Tie Rods for Formwork
9.   Corner Fillets with lip for Formwork economy panels
10. Chamfer with lip for Formwork economy panels
11. Plain Chamfer for Formwork economy panels
12. Water Stoppers for Formwork
13. Joint Former or grout sealant for Formwork

Rebar Processing Equipment and Rebar Accessories
We also supply a wide range of rebar processing equipment and accessories, to the rebar processing and rebar placement industries, such as these Rebar Cutters:
1.   DC-16LZ Rebar Cutter - 220V
2.   DC-16W Rebar Cutter - 220V
3.   DC-20HL Rebar Cutter - 220V
4.   DC-20W Rebar Cutter - 220V
5.   DC-20WH Rebar Cutter - 220V
6.   DC-25X Rebar Cutter - 220V
7.   DC-25W Rebar Cutter - 220V
8.   DC-32WH Rebar Cutter - 220V
9.   M26 Rebar Cutter - 380V
10. M36 Rebar Cutter - 380V
11. M45 Rebar Cutter - 380V
12. MG20H Rebar Cutter - 220V

and these Rebar Benders:
1.   DBD-16L Rebar Bender - 220V
2.   DBD-25H Rebar Bender - 220V
3.   DBD-32X Rebar Bender - 220V
4.   B26 Rebar Bender - 380V
5.   B36 Rebar Bender - 380V
6.   B45 Rebar Bender - 380V
7.   MG20B Rebar Bender - 220V

and Combination Rebar Cutters and Benders:
1.   Manual Rebar Cutter Bender
2.   Mobile Rebar Cutter Bender - Powered by own generator.
3.   DBC-16H Rebar Cutter Bender - 220V
4.   DBC-25X Rebar Cutter Bender - 220V
5.   MG20HB Rebar Cutter Bender - 220V

Special Items such as Wire Grips:
1.   Nagaki Wire Grips